Nanyang wax fine chemical plant of emulsified wax in the manufacture of latex gloves have effect?

Nanyang wax fine chemical plant of emulsified wax in the manufacture of latex gloves have effect?

Emulsified wax is hoar homogeneous translucent liquid, using a special neutral non-ionic emulsifier emulsion, avoid using alkaline saponification before is not stable, easy delamination defects, stored in the shade can hold two years is not layered, demulsification, agglomerate.With acid, strong alkali resistance, resistance to hard water, water-soluble, stable emulsion, arbitrary proportion dilution water stratification, demulsification, agglomerate, long shelf life, high solid content, good dispersion performance characteristics.

1 leather industry: emulsified wax additives used for leather finishing

In leather finishing agent adding emulsified wax mainly filled coating, to improve feel, wear-resisting, prevent layer and increase luster, and so on.With paraffin as the main raw material can greatly reduce the price of wax emulsion, and the result is not worse than natural wax, use is the main agent, high-grade leather finishing can gift leather special sense of brightness and wax.

From the purpose can be divided into soft and hard wax, wax for leather bottom, middle, and top coating;Can be applied to all kinds of leather finishing, after finishing the luster and soft leather, feel is plump moist, can improve the ability of resistance to friction on the surface of the leather.

2 construction for reinforced concrete curing agent.On the surface of the concrete in the process of solidification, such as moisture evaporates too fast, can make a series of chemical reactions in the solidification process was unable to complete, and cannot reach the surface of the maximum compressive strength.So during the period of concrete curing must prevent moisture to evaporate too fast.For this industry developed a film curing agent in emulsion paraffin wax as the basic raw materials, after using this kind of curing agent to avoid the unnecessary surface evaporation, and promoted the cement hydration.

3 the ceramic industry

Porcelain production process, to the poor quality of kaolin, often need to join the emulsified wax make up for the low plasticity or improve the strength of the early products.At the same time using emulsified wax can replace expensive vinyl acetate.In ceramic production process, to join the emulsified wax, can improve the strength of the porcelain making products at the beginning of, also can improve the lubricity.

4 light industry, rubber industry

In light industry, rubber industry, emulsifying wax can be used as a polish, coating and additives.In manufacturing presulfiding process of latex gloves, or in the glue mixing tank, emulsifying wax can be according to the amount of 1.5 ~ 2.5, which can improve the viscous resistance of mold and easy to gloves demoulding.Some USES emulsion formulation, adding emulsified wax can improve performance of latex.

5 release agent

As a release agent is widely used in rubber or plastic mold release, PU mold release, metal mold release and other fields.